Watch Now This tutorial has a related video course created by the Real Python team. Watch it together with the written tutorial to deepen your understanding: Threading in Python

Python threading allows you to have different parts of your program run concurrently and can simplify your design. If you've got some experience in Python and want to speed up your program using threads, then this tutorial is for you!

In this article, you'll learn:

  • What threads are
  • How to create threads and wait for them to finish
  • How to use a ThreadPoolExecutor
  • How to avoid race conditions
  • How to use the common tools that Python threading provides

This article assumes you've got the Python basics down pat and that you're using at least version 3.6 to run the examples. If you need a refresher, you can start with the Python Learning Paths and get up to speed.

If you're not sure if you want to use Python threading, asyncio, or multiprocessing, then you can check out Speed Up Your Python Program With Concurrency.

All of the sources used in this tutorial are available to you in the Real Python GitHub repo.

What Is a Thread?

A thread is a separate flow of execution. This means that your program will have two things happening at once. But for most Python 3 implementations the different threads do not actually execute at the same time: they merely appear to.

It's tempting to think of threading as having two (or more) different processors running on your program, each one doing an independent task at the same time. That's almost right. The threads may be running on different processors, but they will only be running one at a time.

Getting multiple tasks running simultaneously requires a non-standard implementation of Python, writing some of your code in a different language, or using multiprocessing which comes with some extra overhead.

Because of the way CPython implementation of Python works, threading may not speed up all tasks. This is due to interactions with the GIL that essentially limit one Python thread to run at a time.

Tasks that spend much of their time waiting for external events are generally good candidates for threading. Problems that require heavy CPU computation and spend little time waiting for external events might not run faster at all.

This is true for code written in Python and running on the standard CPython implementation. If your threads are written in C they have the ability to release the GIL and run concurrently. If you are running on a different Python implementation, check with the documentation too see how it handles threads.

If you are running a standard Python implementation, writing in only Python, and have a CPU-bound problem, you should check out the multiprocessing module instead.

Architecting your program to use threading can also provide gains in design clarity. Most of the examples you'll learn about in this tutorial are not necessarily going to run faster because they use threads. Using threading in them helps to make the design cleaner and easier to reason about.

So, let's stop talking about threading and start using it!

Starting a Thread

Now that you've got an idea of what a thread is, let's learn how to make one. The Python standard library provides threading, which contains most of the primitives you'll see in this article. Thread, in this module, nicely encapsulates threads, providing a clean interface to work with them.

To start a separate thread, you create a Thread instance and then tell it to .start():

                                                              1                import                logging                                  2                import                threading                                  3                import                time                                  4                                  5                def                thread_function                (                name                ):                                  6                logging                .                info                (                "Thread                                %s                : starting"                ,                name                )                                  7                time                .                sleep                (                2                )                                  8                logging                .                info                (                "Thread                                %s                : finishing"                ,                name                )                                  9                10                if                __name__                ==                "__main__"                :                11                format                =                "                %(asctime)s                :                                %(message)s                "                12                logging                .                basicConfig                (                format                =                format                ,                level                =                logging                .                INFO                ,                13                datefmt                =                "%H:%M:%S"                )                14                15                logging                .                info                (                "Main    : before creating thread"                )                16                x                =                threading                .                Thread                (                target                =                thread_function                ,                args                =                (                1                ,))                17                logging                .                info                (                "Main    : before running thread"                )                18                x                .                start                ()                19                logging                .                info                (                "Main    : wait for the thread to finish"                )                20                # x.join()                21                logging                .                info                (                "Main    : all done"                )                          

If you look around the logging statements, you can see that the main section is creating and starting the thread:

                                            x                =                threading                .                Thread                (                target                =                thread_function                ,                args                =                (                1                ,))                x                .                start                ()                          

When you create a Thread, you pass it a function and a list containing the arguments to that function. In this case, you're telling the Thread to run thread_function() and to pass it 1 as an argument.

For this article, you'll use sequential integers as names for your threads. There is threading.get_ident(), which returns a unique name for each thread, but these are usually neither short nor easily readable.

thread_function() itself doesn't do much. It simply logs some messages with a time.sleep() in between them.

When you run this program as it is (with line twenty commented out), the output will look like this:

                                            $                ./single_thread.py                Main    : before creating thread                Main    : before running thread                Thread 1: starting                Main    : wait for the thread to finish                Main    : all done                Thread 1: finishing                          

You'll notice that the Thread finished after the Main section of your code did. You'll come back to why that is and talk about the mysterious line twenty in the next section.

Daemon Threads

In computer science, a daemon is a process that runs in the background.

Python threading has a more specific meaning for daemon. A daemon thread will shut down immediately when the program exits. One way to think about these definitions is to consider the daemon thread a thread that runs in the background without worrying about shutting it down.

If a program is running Threads that are not daemons, then the program will wait for those threads to complete before it terminates. Threads that are daemons, however, are just killed wherever they are when the program is exiting.

Let's look a little more closely at the output of your program above. The last two lines are the interesting bit. When you run the program, you'll notice that there is a pause (of about 2 seconds) after __main__ has printed its all done message and before the thread is finished.

This pause is Python waiting for the non-daemonic thread to complete. When your Python program ends, part of the shutdown process is to clean up the threading routine.

If you look at the source for Python threading, you'll see that threading._shutdown() walks through all of the running threads and calls .join() on every one that does not have the daemon flag set.

So your program waits to exit because the thread itself is waiting in a sleep. As soon as it has completed and printed the message, .join() will return and the program can exit.

Frequently, this behavior is what you want, but there are other options available to us. Let's first repeat the program with a daemon thread. You do that by changing how you construct the Thread, adding the daemon=True flag:

                                                  x                  =                  threading                  .                  Thread                  (                  target                  =                  thread_function                  ,                  args                  =                  (                  1                  ,),                  daemon                  =                  True                  )                              

When you run the program now, you should see this output:

                                                  $                  ./daemon_thread.py                  Main    : before creating thread                  Main    : before running thread                  Thread 1: starting                  Main    : wait for the thread to finish                  Main    : all done                              

The difference here is that the final line of the output is missing. thread_function() did not get a chance to complete. It was a daemon thread, so when __main__ reached the end of its code and the program wanted to finish, the daemon was killed.

join() a Thread

Daemon threads are handy, but what about when you want to wait for a thread to stop? What about when you want to do that and not exit your program? Now let's go back to your original program and look at that commented out line twenty:

To tell one thread to wait for another thread to finish, you call .join(). If you uncomment that line, the main thread will pause and wait for the thread x to complete running.

Did you test this on the code with the daemon thread or the regular thread? It turns out that it doesn't matter. If you .join() a thread, that statement will wait until either kind of thread is finished.

Working With Many Threads

The example code so far has only been working with two threads: the main thread and one you started with the threading.Thread object.

Frequently, you'll want to start a number of threads and have them do interesting work. Let's start by looking at the harder way of doing that, and then you'll move on to an easier method.

The harder way of starting multiple threads is the one you already know:

                                            import                logging                import                threading                import                time                def                thread_function                (                name                ):                logging                .                info                (                "Thread                                %s                : starting"                ,                name                )                time                .                sleep                (                2                )                logging                .                info                (                "Thread                                %s                : finishing"                ,                name                )                if                __name__                ==                "__main__"                :                format                =                "                %(asctime)s                :                                %(message)s                "                logging                .                basicConfig                (                format                =                format                ,                level                =                logging                .                INFO                ,                datefmt                =                "%H:%M:%S"                )                threads                =                list                ()                for                index                in                range                (                3                ):                logging                .                info                (                "Main    : create and start thread                                %d                ."                ,                index                )                x                =                threading                .                Thread                (                target                =                thread_function                ,                args                =                (                index                ,))                threads                .                append                (                x                )                x                .                start                ()                for                index                ,                thread                in                enumerate                (                threads                ):                logging                .                info                (                "Main    : before joining thread                                %d                ."                ,                index                )                thread                .                join                ()                logging                .                info                (                "Main    : thread                                %d                                  done"                ,                index                )                          

This code uses the same mechanism you saw above to start a thread, create a Thread object, and then call .start(). The program keeps a list of Thread objects so that it can then wait for them later using .join().

Running this code multiple times will likely produce some interesting results. Here's an example output from my machine:

                                            $                ./multiple_threads.py                Main    : create and start thread 0.                Thread 0: starting                Main    : create and start thread 1.                Thread 1: starting                Main    : create and start thread 2.                Thread 2: starting                Main    : before joining thread 0.                Thread 2: finishing                Thread 1: finishing                Thread 0: finishing                Main    : thread 0 done                Main    : before joining thread 1.                Main    : thread 1 done                Main    : before joining thread 2.                Main    : thread 2 done                          

If you walk through the output carefully, you'll see all three threads getting started in the order you might expect, but in this case they finish in the opposite order! Multiple runs will produce different orderings. Look for the Thread x: finishing message to tell you when each thread is done.

The order in which threads are run is determined by the operating system and can be quite hard to predict. It may (and likely will) vary from run to run, so you need to be aware of that when you design algorithms that use threading.

Fortunately, Python gives you several primitives that you'll look at later to help coordinate threads and get them running together. Before that, let's look at how to make managing a group of threads a bit easier.

Using a ThreadPoolExecutor

There's an easier way to start up a group of threads than the one you saw above. It's called a ThreadPoolExecutor, and it's part of the standard library in concurrent.futures (as of Python 3.2).

The easiest way to create it is as a context manager, using the with statement to manage the creation and destruction of the pool.

Here's the __main__ from the last example rewritten to use a ThreadPoolExecutor:

                                            import                concurrent.futures                # [rest of code]                if                __name__                ==                "__main__"                :                format                =                "                %(asctime)s                :                                %(message)s                "                logging                .                basicConfig                (                format                =                format                ,                level                =                logging                .                INFO                ,                datefmt                =                "%H:%M:%S"                )                with                concurrent                .                futures                .                ThreadPoolExecutor                (                max_workers                =                3                )                as                executor                :                executor                .                map                (                thread_function                ,                range                (                3                ))                          

The code creates a ThreadPoolExecutor as a context manager, telling it how many worker threads it wants in the pool. It then uses .map() to step through an iterable of things, in your case range(3), passing each one to a thread in the pool.

The end of the with block causes the ThreadPoolExecutor to do a .join() on each of the threads in the pool. It is strongly recommended that you use ThreadPoolExecutor as a context manager when you can so that you never forget to .join() the threads.

Running your corrected example code will produce output that looks like this:

                                            $                ./executor.py                Thread 0: starting                Thread 1: starting                Thread 2: starting                Thread 1: finishing                Thread 0: finishing                Thread 2: finishing                          

Again, notice how Thread 1 finished before Thread 0. The scheduling of threads is done by the operating system and does not follow a plan that's easy to figure out.

Race Conditions

Before you move on to some of the other features tucked away in Python threading, let's talk a bit about one of the more difficult issues you'll run into when writing threaded programs: race conditions.

Once you've seen what a race condition is and looked at one happening, you'll move on to some of the primitives provided by the standard library to prevent race conditions from happening.

Race conditions can occur when two or more threads access a shared piece of data or resource. In this example, you're going to create a large race condition that happens every time, but be aware that most race conditions are not this obvious. Frequently, they only occur rarely, and they can produce confusing results. As you can imagine, this makes them quite difficult to debug.

Fortunately, this race condition will happen every time, and you'll walk through it in detail to explain what is happening.

For this example, you're going to write a class that updates a database. Okay, you're not really going to have a database: you're just going to fake it, because that's not the point of this article.

Your FakeDatabase will have .__init__() and .update() methods:

                                            class                FakeDatabase                :                def                __init__                (                self                ):                self                .                value                =                0                def                update                (                self                ,                name                ):                logging                .                info                (                "Thread                                %s                : starting update"                ,                name                )                local_copy                =                self                .                value                local_copy                +=                1                time                .                sleep                (                0.1                )                self                .                value                =                local_copy                logging                .                info                (                "Thread                                %s                : finishing update"                ,                name                )                          

FakeDatabase is keeping track of a single number: .value. This is going to be the shared data on which you'll see the race condition.

.__init__() simply initializes .value to zero. So far, so good.

.update() looks a little strange. It's simulating reading a value from a database, doing some computation on it, and then writing a new value back to the database.

In this case, reading from the database just means copying .value to a local variable. The computation is just to add one to the value and then .sleep() for a little bit. Finally, it writes the value back by copying the local value back to .value.

Here's how you'll use this FakeDatabase:

                                            if                __name__                ==                "__main__"                :                format                =                "                %(asctime)s                :                                %(message)s                "                logging                .                basicConfig                (                format                =                format                ,                level                =                logging                .                INFO                ,                datefmt                =                "%H:%M:%S"                )                database                =                FakeDatabase                ()                logging                .                info                (                "Testing update. Starting value is                                %d                ."                ,                database                .                value                )                with                concurrent                .                futures                .                ThreadPoolExecutor                (                max_workers                =                2                )                as                executor                :                for                index                in                range                (                2                ):                executor                .                submit                (                database                .                update                ,                index                )                logging                .                info                (                "Testing update. Ending value is                                %d                ."                ,                database                .                value                )                          

The program creates a ThreadPoolExecutor with two threads and then calls .submit() on each of them, telling them to run database.update().

.submit() has a signature that allows both positional and named arguments to be passed to the function running in the thread:

                                            .                submit                (                function                ,                *                args                ,                **                kwargs                )                          

In the usage above, index is passed as the first and only positional argument to database.update(). You'll see later in this article where you can pass multiple arguments in a similar manner.

Since each thread runs .update(), and .update() adds one to .value, you might expect database.value to be 2 when it's printed out at the end. But you wouldn't be looking at this example if that was the case. If you run the above code, the output looks like this:

                                            $                ./racecond.py                Testing unlocked update. Starting value is 0.                Thread 0: starting update                Thread 1: starting update                Thread 0: finishing update                Thread 1: finishing update                Testing unlocked update. Ending value is 1.                          

You might have expected that to happen, but let's look at the details of what's really going on here, as that will make the solution to this problem easier to understand.

One Thread

Before you dive into this issue with two threads, let's step back and talk a bit about some details of how threads work.

You won't be diving into all of the details here, as that's not important at this level. We'll also be simplifying a few things in a way that won't be technically accurate but will give you the right idea of what is happening.

When you tell your ThreadPoolExecutor to run each thread, you tell it which function to run and what parameters to pass to it: executor.submit(database.update, index).

The result of this is that each of the threads in the pool will call database.update(index). Note that database is a reference to the one FakeDatabase object created in __main__. Calling .update() on that object calls an instance method on that object.

Each thread is going to have a reference to the same FakeDatabase object, database. Each thread will also have a unique value, index, to make the logging statements a bit easier to read:

Thread 1 and Thread 2 use the same shared database.

When the thread starts running .update(), it has its own version of all of the data local to the function. In the case of .update(), this is local_copy. This is definitely a good thing. Otherwise, two threads running the same function would always confuse each other. It means that all variables that are scoped (or local) to a function are thread-safe.

Now you can start walking through what happens if you run the program above with a single thread and a single call to .update().

The image below steps through the execution of .update() if only a single thread is run. The statement is shown on the left followed by a diagram showing the values in the thread's local_copy and the shared database.value:

Single thread modifying a shared database

The diagram is laid out so that time increases as you move from top to bottom. It begins when Thread 1 is created and ends when it is terminated.

When Thread 1 starts, FakeDatabase.value is zero. The first line of code in the method, local_copy = self.value, copies the value zero to the local variable. Next it increments the value of local_copy with the local_copy += 1 statement. You can see .value in Thread 1 getting set to one.

Next time.sleep() is called, which makes the current thread pause and allows other threads to run. Since there is only one thread in this example, this has no effect.

When Thread 1 wakes up and continues, it copies the new value from local_copy to FakeDatabase.value, and then the thread is complete. You can see that database.value is set to one.

So far, so good. You ran .update() once and FakeDatabase.value was incremented to one.

Two Threads

Getting back to the race condition, the two threads will be running concurrently but not at the same time. They will each have their own version of local_copy and will each point to the same database. It is this shared database object that is going to cause the problems.

The program starts with Thread 1 running .update():

Thread 1 gets a copy of shared data and increments it.

When Thread 1 calls time.sleep(), it allows the other thread to start running. This is where things get interesting.

Thread 2 starts up and does the same operations. It's also copying database.value into its private local_copy, and this shared database.value has not yet been updated:

Thread 2 gets a copy of shared data and increments it.

When Thread 2 finally goes to sleep, the shared database.value is still unmodified at zero, and both private versions of local_copy have the value one.

Thread 1 now wakes up and saves its version of local_copy and then terminates, giving Thread 2 a final chance to run. Thread 2 has no idea that Thread 1 ran and updated database.value while it was sleeping. It stores its version of local_copy into database.value, also setting it to one:

Both threads write 1 to shared database.

The two threads have interleaving access to a single shared object, overwriting each other's results. Similar race conditions can arise when one thread frees memory or closes a file handle before the other thread is finished accessing it.

Why This Isn't a Silly Example

The example above is contrived to make sure that the race condition happens every time you run your program. Because the operating system can swap out a thread at any time, it is possible to interrupt a statement like x = x + 1 after it has read the value of x but before it has written back the incremented value.

The details of how this happens are quite interesting, but not needed for the rest of this article, so feel free to skip over this hidden section.

The code above isn't quite as out there as you might originally have thought. It was designed to force a race condition every time you run it, but that makes it much easier to solve than most race conditions.

There are two things to keep in mind when thinking about race conditions:

  1. Even an operation like x += 1 takes the processor many steps. Each of these steps is a separate instruction to the processor.

  2. The operating system can swap which thread is running at any time. A thread can be swapped out after any of these small instructions. This means that a thread can be put to sleep to let another thread run in the middle of a Python statement.

Let's look at this in detail. The REPL below shows a function that takes a parameter and increments it:

>>>

                                                        >>>                                        def                    inc                    (                    x                    ):                    ...                                        x                    +=                    1                    ...                    >>>                                        import                    dis                    >>>                                        dis                    .                    dis                    (                    inc                    )                                          2           0 LOAD_FAST                0 (x)                                          2 LOAD_CONST               1 (1)                                          4 INPLACE_ADD                                          6 STORE_FAST               0 (x)                                          8 LOAD_CONST               0 (None)                                          10 RETURN_VALUE                                  

The REPL example uses dis from the Python standard library to show the smaller steps that the processor does to implement your function. It does a LOAD_FAST of the data value x, it does a LOAD_CONST 1, and then it uses the INPLACE_ADD to add those values together.

We're stopping here for a specific reason. This is the point in .update() above where time.sleep() forced the threads to switch. It is entirely possible that, every once in while, the operating system would switch threads at that exact point even without sleep(), but the call to sleep() makes it happen every time.

As you learned above, the operating system can swap threads at any time. You've walked down this listing to the statement marked 4. If the operating system swaps out this thread and runs a different thread that also modifies x, then when this thread resumes, it will overwrite x with an incorrect value.

Technically, this example won't have a race condition because x is local to inc(). It does illustrate how a thread can be interrupted during a single Python operation, however. The same LOAD, MODIFY, STORE set of operations also happens on global and shared values. You can explore with the dis module and prove that yourself.

It's rare to get a race condition like this to occur, but remember that an infrequent event taken over millions of iterations becomes likely to happen. The rarity of these race conditions makes them much, much harder to debug than regular bugs.

Now back to your regularly scheduled tutorial!

Now that you've seen a race condition in action, let's find out how to solve them!

Basic Synchronization Using Lock

There are a number of ways to avoid or solve race conditions. You won't look at all of them here, but there are a couple that are used frequently. Let's start with Lock.

To solve your race condition above, you need to find a way to allow only one thread at a time into the read-modify-write section of your code. The most common way to do this is called Lock in Python. In some other languages this same idea is called a mutex. Mutex comes from MUTual EXclusion, which is exactly what a Lock does.

A Lock is an object that acts like a hall pass. Only one thread at a time can have the Lock. Any other thread that wants the Lock must wait until the owner of the Lock gives it up.

The basic functions to do this are .acquire() and .release(). A thread will call my_lock.acquire() to get the lock. If the lock is already held, the calling thread will wait until it is released. There's an important point here. If one thread gets the lock but never gives it back, your program will be stuck. You'll read more about this later.

Fortunately, Python's Lock will also operate as a context manager, so you can use it in a with statement, and it gets released automatically when the with block exits for any reason.

Let's look at the FakeDatabase with a Lock added to it. The calling function stays the same:

                                            class                FakeDatabase                :                def                __init__                (                self                ):                self                .                value                =                0                self                .                _lock                =                threading                .                Lock                ()                def                locked_update                (                self                ,                name                ):                logging                .                info                (                "Thread                                %s                : starting update"                ,                name                )                logging                .                debug                (                "Thread                                %s                                  about to lock"                ,                name                )                with                self                .                _lock                :                logging                .                debug                (                "Thread                                %s                                  has lock"                ,                name                )                local_copy                =                self                .                value                local_copy                +=                1                time                .                sleep                (                0.1                )                self                .                value                =                local_copy                logging                .                debug                (                "Thread                                %s                                  about to release lock"                ,                name                )                logging                .                debug                (                "Thread                                %s                                  after release"                ,                name                )                logging                .                info                (                "Thread                                %s                : finishing update"                ,                name                )                          

Other than adding a bunch of debug logging so you can see the locking more clearly, the big change here is to add a member called ._lock, which is a threading.Lock() object. This ._lock is initialized in the unlocked state and locked and released by the with statement.

It's worth noting here that the thread running this function will hold on to that Lock until it is completely finished updating the database. In this case, that means it will hold the Lock while it copies, updates, sleeps, and then writes the value back to the database.

If you run this version with logging set to warning level, you'll see this:

                                            $                ./fixrace.py                Testing locked update. Starting value is 0.                Thread 0: starting update                Thread 1: starting update                Thread 0: finishing update                Thread 1: finishing update                Testing locked update. Ending value is 2.                          

Look at that. Your program finally works!

You can turn on full logging by setting the level to DEBUG by adding this statement after you configure the logging output in __main__:

                                            logging                .                getLogger                ()                .                setLevel                (                logging                .                DEBUG                )                          

Running this program with DEBUG logging turned on looks like this:

                                            $                ./fixrace.py                Testing locked update. Starting value is 0.                Thread 0: starting update                Thread 0 about to lock                Thread 0 has lock                Thread 1: starting update                Thread 1 about to lock                Thread 0 about to release lock                Thread 0 after release                Thread 0: finishing update                Thread 1 has lock                Thread 1 about to release lock                Thread 1 after release                Thread 1: finishing update                Testing locked update. Ending value is 2.                          

In this output you can see Thread 0 acquires the lock and is still holding it when it goes to sleep. Thread 1 then starts and attempts to acquire the same lock. Because Thread 0 is still holding it, Thread 1 has to wait. This is the mutual exclusion that a Lock provides.

Many of the examples in the rest of this article will have WARNING and DEBUG level logging. We'll generally only show the WARNING level output, as the DEBUG logs can be quite lengthy. Try out the programs with the logging turned up and see what they do.

Deadlock

Before you move on, you should look at a common problem when using Locks. As you saw, if the Lock has already been acquired, a second call to .acquire() will wait until the thread that is holding the Lock calls .release(). What do you think happens when you run this code:

                                            import                threading                l                =                threading                .                Lock                ()                print                (                "before first acquire"                )                l                .                acquire                ()                print                (                "before second acquire"                )                l                .                acquire                ()                print                (                "acquired lock twice"                )                          

When the program calls l.acquire() the second time, it hangs waiting for the Lock to be released. In this example, you can fix the deadlock by removing the second call, but deadlocks usually happen from one of two subtle things:

  1. An implementation bug where a Lock is not released properly
  2. A design issue where a utility function needs to be called by functions that might or might not already have the Lock

The first situation happens sometimes, but using a Lock as a context manager greatly reduces how often. It is recommended to write code whenever possible to make use of context managers, as they help to avoid situations where an exception skips you over the .release() call.

The design issue can be a bit trickier in some languages. Thankfully, Python threading has a second object, called RLock, that is designed for just this situation. It allows a thread to .acquire() an RLock multiple times before it calls .release(). That thread is still required to call .release() the same number of times it called .acquire(), but it should be doing that anyway.

Lock and RLock are two of the basic tools used in threaded programming to prevent race conditions. There are a few other that work in different ways. Before you look at them, let's shift to a slightly different problem domain.

Producer-Consumer Threading

The Producer-Consumer Problem is a standard computer science problem used to look at threading or process synchronization issues. You're going to look at a variant of it to get some ideas of what primitives the Python threading module provides.

For this example, you're going to imagine a program that needs to read messages from a network and write them to disk. The program does not request a message when it wants. It must be listening and accept messages as they come in. The messages will not come in at a regular pace, but will be coming in bursts. This part of the program is called the producer.

On the other side, once you have a message, you need to write it to a database. The database access is slow, but fast enough to keep up to the average pace of messages. It is not fast enough to keep up when a burst of messages comes in. This part is the consumer.

In between the producer and the consumer, you will create a Pipeline that will be the part that changes as you learn about different synchronization objects.

That's the basic layout. Let's look at a solution using Lock. It doesn't work perfectly, but it uses tools you already know, so it's a good place to start.

Producer-Consumer Using Lock

Since this is an article about Python threading, and since you just read about the Lock primitive, let's try to solve this problem with two threads using a Lock or two.

The general design is that there is a producer thread that reads from the fake network and puts the message into a Pipeline:

                                                  import                  random                  SENTINEL                  =                  object                  ()                  def                  producer                  (                  pipeline                  ):                  """Pretend we're getting a message from the network."""                  for                  index                  in                  range                  (                  10                  ):                  message                  =                  random                  .                  randint                  (                  1                  ,                  101                  )                  logging                  .                  info                  (                  "Producer got message:                                    %s                  "                  ,                  message                  )                  pipeline                  .                  set_message                  (                  message                  ,                  "Producer"                  )                  # Send a sentinel message to tell consumer we're done                  pipeline                  .                  set_message                  (                  SENTINEL                  ,                  "Producer"                  )                              

To generate a fake message, the producer gets a random number between one and one hundred. It calls .set_message() on the pipeline to send it to the consumer.

The producer also uses a SENTINEL value to signal the consumer to stop after it has sent ten values. This is a little awkward, but don't worry, you'll see ways to get rid of this SENTINEL value after you work through this example.

On the other side of the pipeline is the consumer:

                                                  def                  consumer                  (                  pipeline                  ):                  """Pretend we're saving a number in the database."""                  message                  =                  0                  while                  message                  is                  not                  SENTINEL                  :                  message                  =                  pipeline                  .                  get_message                  (                  "Consumer"                  )                  if                  message                  is                  not                  SENTINEL                  :                  logging                  .                  info                  (                  "Consumer storing message:                                    %s                  "                  ,                  message                  )                              

The consumer reads a message from the pipeline and writes it to a fake database, which in this case is just printing it to the display. If it gets the SENTINEL value, it returns from the function, which will terminate the thread.

Before you look at the really interesting part, the Pipeline, here's the __main__ section, which spawns these threads:

                                                  if                  __name__                  ==                  "__main__"                  :                  format                  =                  "                  %(asctime)s                  :                                    %(message)s                  "                  logging                  .                  basicConfig                  (                  format                  =                  format                  ,                  level                  =                  logging                  .                  INFO                  ,                  datefmt                  =                  "%H:%M:%S"                  )                  # logging.getLogger().setLevel(logging.DEBUG)                  pipeline                  =                  Pipeline                  ()                  with                  concurrent                  .                  futures                  .                  ThreadPoolExecutor                  (                  max_workers                  =                  2                  )                  as                  executor                  :                  executor                  .                  submit                  (                  producer                  ,                  pipeline                  )                  executor                  .                  submit                  (                  consumer                  ,                  pipeline                  )                              

This should look fairly familiar as it's close to the __main__ code in the previous examples.

Remember that you can turn on DEBUG logging to see all of the logging messages by uncommenting this line:

                                                  # logging.getLogger().setLevel(logging.DEBUG)                              

It can be worthwhile to walk through the DEBUG logging messages to see exactly where each thread acquires and releases the locks.

Now let's take a look at the Pipeline that passes messages from the producer to the consumer:

                                                  class                  Pipeline                  :                  """                                      Class to allow a single element pipeline between producer and consumer.                                      """                  def                  __init__                  (                  self                  ):                  self                  .                  message                  =                  0                  self                  .                  producer_lock                  =                  threading                  .                  Lock                  ()                  self                  .                  consumer_lock                  =                  threading                  .                  Lock                  ()                  self                  .                  consumer_lock                  .                  acquire                  ()                  def                  get_message                  (                  self                  ,                  name                  ):                  logging                  .                  debug                  (                  "                  %s                  :about to acquire getlock"                  ,                  name                  )                  self                  .                  consumer_lock                  .                  acquire                  ()                  logging                  .                  debug                  (                  "                  %s                  :have getlock"                  ,                  name                  )                  message                  =                  self                  .                  message                  logging                  .                  debug                  (                  "                  %s                  :about to release setlock"                  ,                  name                  )                  self                  .                  producer_lock                  .                  release                  ()                  logging                  .                  debug                  (                  "                  %s                  :setlock released"                  ,                  name                  )                  return                  message                  def                  set_message                  (                  self                  ,                  message                  ,                  name                  ):                  logging                  .                  debug                  (                  "                  %s                  :about to acquire setlock"                  ,                  name                  )                  self                  .                  producer_lock                  .                  acquire                  ()                  logging                  .                  debug                  (                  "                  %s                  :have setlock"                  ,                  name                  )                  self                  .                  message                  =                  message                  logging                  .                  debug                  (                  "                  %s                  :about to release getlock"                  ,                  name                  )                  self                  .                  consumer_lock                  .                  release                  ()                  logging                  .                  debug                  (                  "                  %s                  :getlock released"                  ,                  name                  )                              

Woah! That's a lot of code. A pretty high percentage of that is just logging statements to make it easier to see what's happening when you run it. Here's the same code with all of the logging statements removed:

                                                  class                  Pipeline                  :                  """                                      Class to allow a single element pipeline between producer and consumer.                                      """                  def                  __init__                  (                  self                  ):                  self                  .                  message                  =                  0                  self                  .                  producer_lock                  =                  threading                  .                  Lock                  ()                  self                  .                  consumer_lock                  =                  threading                  .                  Lock                  ()                  self                  .                  consumer_lock                  .                  acquire                  ()                  def                  get_message                  (                  self                  ,                  name                  ):                  self                  .                  consumer_lock                  .                  acquire                  ()                  message                  =                  self                  .                  message                  self                  .                  producer_lock                  .                  release                  ()                  return                  message                  def                  set_message                  (                  self                  ,                  message                  ,                  name                  ):                  self                  .                  producer_lock                  .                  acquire                  ()                  self                  .                  message                  =                  message                  self                  .                  consumer_lock                  .                  release                  ()                              

That seems a bit more manageable. The Pipeline in this version of your code has three members:

  1. .message stores the message to pass.
  2. .producer_lock is a threading.Lock object that restricts access to the message by the producer thread.
  3. .consumer_lock is also a threading.Lock that restricts access to the message by the consumer thread.

__init__() initializes these three members and then calls .acquire() on the .consumer_lock. This is the state you want to start in. The producer is allowed to add a new message, but the consumer needs to wait until a message is present.

.get_message() and .set_messages() are nearly opposites. .get_message() calls .acquire() on the consumer_lock. This is the call that will make the consumer wait until a message is ready.

Once the consumer has acquired the .consumer_lock, it copies out the value in .message and then calls .release() on the .producer_lock. Releasing this lock is what allows the producer to insert the next message into the pipeline.

Before you go on to .set_message(), there's something subtle going on in .get_message() that's pretty easy to miss. It might seem tempting to get rid of message and just have the function end with return self.message. See if you can figure out why you don't want to do that before moving on.

Here's the answer. As soon as the consumer calls .producer_lock.release(), it can be swapped out, and the producer can start running. That could happen before .release() returns! This means that there is a slight possibility that when the function returns self.message, that could actually be the next message generated, so you would lose the first message. This is another example of a race condition.

Moving on to .set_message(), you can see the opposite side of the transaction. The producer will call this with a message. It will acquire the .producer_lock, set the .message, and the call .release() on then consumer_lock, which will allow the consumer to read that value.

Let's run the code that has logging set to WARNING and see what it looks like:

                                                  $                  ./prodcom_lock.py                  Producer got data 43                  Producer got data 45                  Consumer storing data: 43                  Producer got data 86                  Consumer storing data: 45                  Producer got data 40                  Consumer storing data: 86                  Producer got data 62                  Consumer storing data: 40                  Producer got data 15                  Consumer storing data: 62                  Producer got data 16                  Consumer storing data: 15                  Producer got data 61                  Consumer storing data: 16                  Producer got data 73                  Consumer storing data: 61                  Producer got data 22                  Consumer storing data: 73                  Consumer storing data: 22                              

At first, you might find it odd that the producer gets two messages before the consumer even runs. If you look back at the producer and .set_message(), you will notice that the only place it will wait for a Lock is when it attempts to put the message into the pipeline. This is done after the producer gets the message and logs that it has it.

When the producer attempts to send this second message, it will call .set_message() the second time and it will block.

The operating system can swap threads at any time, but it generally lets each thread have a reasonable amount of time to run before swapping it out. That's why the producer usually runs until it blocks in the second call to .set_message().

Once a thread is blocked, however, the operating system will always swap it out and find a different thread to run. In this case, the only other thread with anything to do is the consumer.

The consumer calls .get_message(), which reads the message and calls .release() on the .producer_lock, thus allowing the producer to run again the next time threads are swapped.

Notice that the first message was 43, and that is exactly what the consumer read, even though the producer had already generated the 45 message.

While it works for this limited test, it is not a great solution to the producer-consumer problem in general because it only allows a single value in the pipeline at a time. When the producer gets a burst of messages, it will have nowhere to put them.

Let's move on to a better way to solve this problem, using a Queue.

Producer-Consumer Using Queue

If you want to be able to handle more than one value in the pipeline at a time, you'll need a data structure for the pipeline that allows the number to grow and shrink as data backs up from the producer.

Python's standard library has a queue module which, in turn, has a Queue class. Let's change the Pipeline to use a Queue instead of just a variable protected by a Lock. You'll also use a different way to stop the worker threads by using a different primitive from Python threading, an Event.

Let's start with the Event. The threading.Event object allows one thread to signal an event while many other threads can be waiting for that event to happen. The key usage in this code is that the threads that are waiting for the event do not necessarily need to stop what they are doing, they can just check the status of the Event every once in a while.

The triggering of the event can be many things. In this example, the main thread will simply sleep for a while and then .set() it:

                                                                      1                  if                  __name__                  ==                  "__main__"                  :                                      2                  format                  =                  "                  %(asctime)s                  :                                    %(message)s                  "                                      3                  logging                  .                  basicConfig                  (                  format                  =                  format                  ,                  level                  =                  logging                  .                  INFO                  ,                                      4                  datefmt                  =                  "%H:%M:%S"                  )                                      5                  # logging.getLogger().setLevel(logging.DEBUG)                                      6                                      7                  pipeline                  =                  Pipeline                  ()                                      8                  event                  =                  threading                  .                  Event                  ()                                      9                  with                  concurrent                  .                  futures                  .                  ThreadPoolExecutor                  (                  max_workers                  =                  2                  )                  as                  executor                  :                  10                  executor                  .                  submit                  (                  producer                  ,                  pipeline                  ,                  event                  )                  11                  executor                  .                  submit                  (                  consumer                  ,                  pipeline                  ,                  event                  )                  12                  13                  time                  .                  sleep                  (                  0.1                  )                  14                  logging                  .                  info                  (                  "Main: about to set event"                  )                  15                  event                  .                  set                  ()                              

The only changes here are the creation of the event object on line 8, passing the event as a parameter on lines 10 and 11, and the final section on lines 13 to 15, which sleep for a second, log a message, and then call .set() on the event.

The producer also did not have to change too much:

                                                                      1                  def                  producer                  (                  pipeline                  ,                  event                  ):                                      2                  """Pretend we're getting a number from the network."""                                      3                  while                  not                  event                  .                  is_set                  ():                                      4                  message                  =                  random                  .                  randint                  (                  1                  ,                  101                  )                                      5                  logging                  .                  info                  (                  "Producer got message:                                    %s                  "                  ,                  message                  )                                      6                  pipeline                  .                  set_message                  (                  message                  ,                  "Producer"                  )                                      7                                      8                  logging                  .                  info                  (                  "Producer received EXIT event. Exiting"                  )                              

It now will loop until it sees that the event was set on line 3. It also no longer puts the SENTINEL value into the pipeline.

consumer had to change a little more:

                                                                      1                  def                  consumer                  (                  pipeline                  ,                  event                  ):                                      2                  """Pretend we're saving a number in the database."""                                      3                  while                  not                  event                  .                  is_set                  ()                  or                  not                  pipeline                  .                  empty                  ():                                      4                  message                  =                  pipeline                  .                  get_message                  (                  "Consumer"                  )                                      5                  logging                  .                  info                  (                                      6                  "Consumer storing message:                                    %s                                      (queue size=                  %s                  )"                  ,                                      7                  message                  ,                                      8                  pipeline                  .                  qsize                  (),                                      9                  )                  10                  11                  logging                  .                  info                  (                  "Consumer received EXIT event. Exiting"                  )                              

While you got to take out the code related to the SENTINEL value, you did have to do a slightly more complicated while condition. Not only does it loop until the event is set, but it also needs to keep looping until the pipeline has been emptied.

Making sure the queue is empty before the consumer finishes prevents another fun issue. If the consumer does exit while the pipeline has messages in it, there are two bad things that can happen. The first is that you lose those final messages, but the more serious one is that the producer can get caught attempting to add a message to a full queue and never return.

This happens if the event gets triggered after the producer has checked the .is_set() condition but before it calls pipeline.set_message().

If that happens, it's possible for the consumer to wake up and exit with the queue still completely full. The producer will then call .set_message() which will wait until there is space on the queue for the new message. The consumer has already exited, so this will not happen and the producer will not exit.

The rest of the consumer should look familiar.

The Pipeline has changed dramatically, however:

                                                                      1                  class                  Pipeline                  (                  queue                  .                  Queue                  ):                                      2                  def                  __init__                  (                  self                  ):                                      3                  super                  ()                  .                  __init__                  (                  maxsize                  =                  10                  )                                      4                                      5                  def                  get_message                  (                  self                  ,                  name                  ):                                      6                  logging                  .                  debug                  (                  "                  %s                  :about to get from queue"                  ,                  name                  )                                      7                  value                  =                  self                  .                  get                  ()                                      8                  logging                  .                  debug                  (                  "                  %s                  :got                                    %d                                      from queue"                  ,                  name                  ,                  value                  )                                      9                  return                  value                  10                  11                  def                  set_message                  (                  self                  ,                  value                  ,                  name                  ):                  12                  logging                  .                  debug                  (                  "                  %s                  :about to add                                    %d                                      to queue"                  ,                  name                  ,                  value                  )                  13                  self                  .                  put                  (                  value                  )                  14                  logging                  .                  debug                  (                  "                  %s                  :added                                    %d                                      to queue"                  ,                  name                  ,                  value                  )                              

You can see that Pipeline is a subclass of queue.Queue. Queue has an optional parameter when initializing to specify a maximum size of the queue.

If you give a positive number for maxsize, it will limit the queue to that number of elements, causing .put() to block until there are fewer than maxsize elements. If you don't specify maxsize, then the queue will grow to the limits of your computer's memory.

.get_message() and .set_message() got much smaller. They basically wrap .get() and .put() on the Queue. You might be wondering where all of the locking code that prevents the threads from causing race conditions went.

The core devs who wrote the standard library knew that a Queue is frequently used in multi-threading environments and incorporated all of that locking code inside the Queue itself. Queue is thread-safe.

Running this program looks like the following:

                                                  $                  ./prodcom_queue.py                  Producer got message: 32                  Producer got message: 51                  Producer got message: 25                  Producer got message: 94                  Producer got message: 29                  Consumer storing message: 32 (queue size=3)                  Producer got message: 96                  Consumer storing message: 51 (queue size=3)                  Producer got message: 6                  Consumer storing message: 25 (queue size=3)                  Producer got message: 31                  [many lines deleted]                  Producer got message: 80                  Consumer storing message: 94 (queue size=6)                  Producer got message: 33                  Consumer storing message: 20 (queue size=6)                  Producer got message: 48                  Consumer storing message: 31 (queue size=6)                  Producer got message: 52                  Consumer storing message: 98 (queue size=6)                  Main: about to set event                  Producer got message: 13                  Consumer storing message: 59 (queue size=6)                  Producer received EXIT event. Exiting                  Consumer storing message: 75 (queue size=6)                  Consumer storing message: 97 (queue size=5)                  Consumer storing message: 80 (queue size=4)                  Consumer storing message: 33 (queue size=3)                  Consumer storing message: 48 (queue size=2)                  Consumer storing message: 52 (queue size=1)                  Consumer storing message: 13 (queue size=0)                  Consumer received EXIT event. Exiting                              

If you read through the output in my example, you can see some interesting things happening. Right at the top, you can see the producer got to create five messages and place four of them on the queue. It got swapped out by the operating system before it could place the fifth one.

The consumer then ran and pulled off the first message. It printed out that message as well as how deep the queue was at that point:

                                                  Consumer storing message: 32 (queue size=3)                              

This is how you know that the fifth message hasn't made it into the pipeline yet. The queue is down to size three after a single message was removed. You also know that the queue can hold ten messages, so the producer thread didn't get blocked by the queue. It was swapped out by the OS.

As the program starts to wrap up, can you see the main thread generating the event which causes the producer to exit immediately. The consumer still has a bunch of work do to, so it keeps running until it has cleaned out the pipeline.

Try playing with different queue sizes and calls to time.sleep() in the producer or the consumer to simulate longer network or disk access times respectively. Even slight changes to these elements of the program will make large differences in your results.

This is a much better solution to the producer-consumer problem, but you can simplify it even more. The Pipeline really isn't needed for this problem. Once you take away the logging, it just becomes a queue.Queue.

Here's what the final code looks like using queue.Queue directly:

                                                  import                  concurrent.futures                  import                  logging                  import                  queue                  import                  random                  import                  threading                  import                  time                  def                  producer                  (                  queue                  ,                  event                  ):                  """Pretend we're getting a number from the network."""                  while                  not                  event                  .                  is_set                  ():                  message                  =                  random                  .                  randint                  (                  1                  ,                  101                  )                  logging                  .                  info                  (                  "Producer got message:                                    %s                  "                  ,                  message                  )                  queue                  .                  put                  (                  message                  )                  logging                  .                  info                  (                  "Producer received event. Exiting"                  )                  def                  consumer                  (                  queue                  ,                  event                  ):                  """Pretend we're saving a number in the database."""                  while                  not                  event                  .                  is_set                  ()                  or                  not                  queue                  .                  empty                  ():                  message                  =                  queue                  .                  get                  ()                  logging                  .                  info                  (                  "Consumer storing message:                                    %s                                      (size=                  %d                  )"                  ,                  message                  ,                  queue                  .                  qsize                  ()                  )                  logging                  .                  info                  (                  "Consumer received event. Exiting"                  )                  if                  __name__                  ==                  "__main__"                  :                  format                  =                  "                  %(asctime)s                  :                                    %(message)s                  "                  logging                  .                  basicConfig                  (                  format                  =                  format                  ,                  level                  =                  logging                  .                  INFO                  ,                  datefmt                  =                  "%H:%M:%S"                  )                  pipeline                  =                  queue                  .                  Queue                  (                  maxsize                  =                  10                  )                  event                  =                  threading                  .                  Event                  ()                  with                  concurrent                  .                  futures                  .                  ThreadPoolExecutor                  (                  max_workers                  =                  2                  )                  as                  executor                  :                  executor                  .                  submit                  (                  producer                  ,                  pipeline                  ,                  event                  )                  executor                  .                  submit                  (                  consumer                  ,                  pipeline                  ,                  event                  )                  time                  .                  sleep                  (                  0.1                  )                  logging                  .                  info                  (                  "Main: about to set event"                  )                  event                  .                  set                  ()                              

That's easier to read and shows how using Python's built-in primitives can simplify a complex problem.

Lock and Queue are handy classes to solve concurrency issues, but there are others provided by the standard library. Before you wrap up this tutorial, let's do a quick survey of some of them.

Threading Objects

There are a few more primitives offered by the Python threading module. While you didn't need these for the examples above, they can come in handy in different use cases, so it's good to be familiar with them.

Semaphore

The first Python threading object to look at is threading.Semaphore. A Semaphore is a counter with a few special properties. The first one is that the counting is atomic. This means that there is a guarantee that the operating system will not swap out the thread in the middle of incrementing or decrementing the counter.

The internal counter is incremented when you call .release() and decremented when you call .acquire().

The next special property is that if a thread calls .acquire() when the counter is zero, that thread will block until a different thread calls .release() and increments the counter to one.

Semaphores are frequently used to protect a resource that has a limited capacity. An example would be if you have a pool of connections and want to limit the size of that pool to a specific number.

Timer

A threading.Timer is a way to schedule a function to be called after a certain amount of time has passed. You create a Timer by passing in a number of seconds to wait and a function to call:

                                                  t                  =                  threading                  .                  Timer                  (                  30.0                  ,                  my_function                  )                              

You start the Timer by calling .start(). The function will be called on a new thread at some point after the specified time, but be aware that there is no promise that it will be called exactly at the time you want.

If you want to stop a Timer that you've already started, you can cancel it by calling .cancel(). Calling .cancel() after the Timer has triggered does nothing and does not produce an exception.

A Timer can be used to prompt a user for action after a specific amount of time. If the user does the action before the Timer expires, .cancel() can be called.

Barrier

A threading.Barrier can be used to keep a fixed number of threads in sync. When creating a Barrier, the caller must specify how many threads will be synchronizing on it. Each thread calls .wait() on the Barrier. They all will remain blocked until the specified number of threads are waiting, and then the are all released at the same time.

Remember that threads are scheduled by the operating system so, even though all of the threads are released simultaneously, they will be scheduled to run one at a time.

One use for a Barrier is to allow a pool of threads to initialize themselves. Having the threads wait on a Barrier after they are initialized will ensure that none of the threads start running before all of the threads are finished with their initialization.

Conclusion: Threading in Python

You've now seen much of what Python threading has to offer and some examples of how to build threaded programs and the problems they solve. You've also seen a few instances of the problems that arise when writing and debugging threaded programs.

If you'd like to explore other options for concurrency in Python, check out Speed Up Your Python Program With Concurrency.

If you're interested in doing a deep dive on the asyncio module, go read Async IO in Python: A Complete Walkthrough.

Whatever you do, you now have the information and confidence you need to write programs using Python threading!

Special thanks to reader JL Diaz for helping to clean up the introduction.

Watch Now This tutorial has a related video course created by the Real Python team. Watch it together with the written tutorial to deepen your understanding: Threading in Python